Q-Industrial — Urban and commercial transport

Essential Technologies

10-a.

For surfaces that require resistance to strong atmospheric influences

Excellent resistance to light and atmospheric conditions. Recommended as a two-layers cycle where good corrosion protection and high-gloss final appearance is required.

Characteristics

Gloss:

High-gloss

Layers:

Steel

Blast clean to Sa 2½ or hand clean to St 3.

Galvanized Steel

Use Scotch-Brite® abrasive cloth and degrease, perform adhesion test.

Aluminium

Sand with P280-320 sandpaper, clean and degrease, perform adhesion test.

Plastic Materials

Glass

Pre-existing coatings

Remove old layers by sandblasting or mechanical grinding with P240-320 sandpaper, clean and degrease.

ACR-020

Specifications

2K Acrylic Primer ZNP (Light-grey or beige)

DFT:

40-60 µ

ACR-289

Specifications

2K Acrylic Topcoat HP (High-gloss)

DFT:

30-60 µ

Total DFT

70-120 µ

Technical Documentation

Access to PDF

17-a.

For surfaces requiring resistance to extremely strong atmospheric influences

Great adhesion and anticorrosive barrier, high body and filling property. Excellent resistance to light and atmospheric conditions. Recommended as a two-layers cycle where a high-gloss final look is required.

Characteristics

Gloss:

High-gloss

Layers:

Steel

Blast clean to Sa 2½ or hand clean to St 3.

Galvanized Steel

Use Scotch-Brite® abrasive cloth and degrease.

Aluminium

Sand with P280-320 sandpaper, clean and degrease.

Plastic Materials

Glass

Pre-existing coatings

Remove old layers by sandblasting or mechanical grinding with P240-320 sandpaper, clean and degrease.

EPX-040

Specifications

2K Epoxy ZNP (Light-grey or beige)

DFT:

40-150 µ

ACR-289

Specifications

2K Acrylic Topcoat HP (High-gloss)

DFT:

30-60 µ

Total DFT

90-210 µ

Technical Documentation

Access to PDF

24-a.

For plastic parts, including PE and PP, glass and old coatings, requiring resistance to atmospheric influences

Excellent adhesion to plastic and other problematic surfaces. Excellent resistance to light and atmospheric conditions. Recommended for painting plastic with a high-gloss effect.

Characteristics

Gloss:

High-gloss

Layers:

Steel

Blast clean to Sa 2½ or hand clean to St 3.

Galvanized Steel

Use Scotch-Brite® abrasive cloth and degrease.

Aluminium

Sand with P280-320 sandpaper, clean and degrease

Plastic Materials

Glass