Q-Industrial — Technologies

1-a

For surfaces that require resistance to atmospheric and/or mechanical influences

Zinc phosphate 2К Acrylic DTM with high atmosphericing and mechanical resistance, high flexibility and high anticorrosive barrier. Recommended DFT = 60-80 µ.

Characteristics

Gloss:

Matt

Layers:

Surface preparation

Steel:

Blast clean to Sa 2½ or hand clean to St 3.

Galvanized Steel:

Use Scotch-Brite® abrasive cloth and degrease, perform adhesion test.

Aluminium:

Sand with P280-320 sandpaper, clean and degrease, perform adhesion test.

Plastic Materials:

Wash with acetone, isopropyl alcohol or special solvents, use Scotch-Brite® abrasive cloth and degrease, perform adhesion test.

Glass:

Pre-existing coatings:

Remove old layers by sandblasting or mechanical grinding with P240-320 sandpaper, clean and degrease.

Products

ACR-131

Specifications

2K Acrylic DTM (Matt)

DFT:

60-80 µ

Technical Documentation

Access to PDF

1-b

For internal and external parts

Zinc phosphate 2К Acrylic DTM with high atmosphericing and mechanical resistance, high flexibility and high anticorrosive barrier. Recommended DFT = 60-80 µ.

Characteristics

Gloss:

Matt

Layers:

Surface preparation

Steel:

Blast clean to Sa 2½ or hand clean to St 3.

Galvanized Steel:

Use Scotch-Brite® abrasive cloth and degrease, perform adhesion test.

Aluminium:

Sand with P280-320 sandpaper, clean and degrease, perform adhesion test.

Plastic Materials:

Wash with acetone, isopropyl alcohol or special solvents, use Scotch-Brite® abrasive cloth and degrease, perform adhesion test.

Glass:

Pre-existing coatings:

Remove old layers by sandblasting or mechanical grinding with P240-320 sandpaper, clean and degrease.

Products

ACR-131

Specifications

2K Acrylic DTM (Matt)

DFT:

60-80 µ

Technical Documentation

Access to PDF

1-c

For surfaces, with the exception of PE and PP, requiring resistance to atmospheric and/or mechanical influences

Zinc phosphate 2К Acrylic DTM with high atmosphericing and mechanical resistance and high flexibility. Recommended DFT = 60-80 µ.

Characteristics

Gloss:

Matt

Layers:

Surface preparation

Steel:

Blast clean to Sa 2½ or hand clean to St 3.

Galvanized Steel:

Use Scotch-Brite® abrasive cloth and degrease, perform adhesion test.

Aluminium:

Sand with P280-320 sandpaper, clean and degrease, perform adhesion test.

Plastic Materials:

Wash with acetone, isopropyl alcohol or special solvents, use Scotch-Brite® abrasive cloth and degrease, perform adhesion test.

Glass:

Pre-existing coatings:

Remove old layers by sandblasting or mechanical grinding with P240-320 sandpaper, clean and degrease.

Products

ACR-131

Specifications

2K Acrylic DTM (Matt)

DFT:

60-80 µ

Technical Documentation

Access to PDF

2-a

For surfaces that require resistance to atmospheric influences

Zinc phosphate 2К Acrylic DTM with high atmosphericing resistance, high flexibility and high anticorrosive barrier. Recommended DFT = 60-80 µ.

Characteristics

Gloss:

Semi-gloss

Layers:

Surface preparation

Steel:

Blast clean to Sa 2½ or hand clean to St 3.

Galvanized Steel:

Use Scotch-Brite® abrasive cloth and degrease, perform adhesion test.

Aluminium:

Sand with P280-320 sandpaper, clean and degrease, perform adhesion test.

Plastic Materials:

Wash with acetone, isopropyl alcohol or special solvents, use Scotch-Brite® abrasive cloth and degrease, perform adhesion test.

Glass:

Pre-existing coatings:

Remove old layers by sandblasting or mechanical grinding with P240-320 sandpaper, clean and degrease.

Products

ACR-136

Specifications

2K Acrylic DTM (Semi-gloss)

DFT:

60-80 µ

Technical Documentation

Access to PDF

2-b

For interior and exterior parts

Zinc phosphate 2К Acrylic DTM with high atmosphericing resistance, high flexibility and high anticorrosive barrier. Recommended DFT = 60-80 µ.

Characteristics

Gloss:

Semi-gloss

Layers:

Surface preparation

Steel:

Blast clean to Sa 2½ or hand clean to St 3.

Galvanized Steel:

Use Scotch-Brite® abrasive cloth and degrease, perform adhesion test.

Aluminium:

Sand with P280-320 sandpaper, clean and degrease, perform adhesion test.

Plastic Materials:

Wash with acetone, isopropyl alcohol or special solvents, use Scotch-Brite® abrasive cloth and degrease, perform adhesion test.

Glass:

Pre-existing coatings:

Remove old layers by sandblasting or mechanical grinding with P240-320 sandpaper, clean and degrease.

Products

ACR-136

Specifications

2K Acrylic DTM (Semi-gloss)

DFT:

60-80 µ

Technical Documentation

Access to PDF

2-c

For surfaces, with the exception of PE and PP, requiring resistance to atmospheric influences

Zinc phosphate 2К Acrylic DTM with high atmosphericing resistance and high flexibility. Recommended DFT = 60-80 µ.

Characteristics

Gloss:

Semi-gloss

Layers:

Surface preparation

Steel:

Blast clean to Sa 2½ or hand clean to St 3.

Galvanized Steel:

Use Scotch-Brite® abrasive cloth and degrease, perform adhesion test.

Aluminium:

Sand with P280-320 sandpaper, clean and degrease, perform adhesion test.

Plastic Materials:

Wash with acetone, isopropyl alcohol or special solvents, use Scotch-Brite® abrasive cloth and degrease, perform adhesion test.

Glass:

Pre-existing coatings:

Remove old layers by sandblasting or mechanical grinding with P240-320 sandpaper, clean and degrease.

Products

ACR-136

Specifications

2K Acrylic DTM (Semi-gloss)

DFT:

60-80 µ

Technical Documentation

Access to PDF

3-a

For surfaces that require resistance to atmospheric and/or chemical influences

Zinc phosphate 2К Acrylic DTM with high atmosphericing resistance, high flexibility and high anticorrosive barrier.

Characteristics

Gloss:

Gloss

Layers:

Surface preparation

Steel:

Blast clean to Sa 2½ or hand clean to St 3.

Galvanized Steel:

Use Scotch-Brite® abrasive cloth and degrease, perform adhesion test.

Aluminium:

Sand with P280-320 sandpaper, clean and degrease, perform adhesion test.

Plastic Materials:

Wash with acetone, isopropyl alcohol or special solvents, use Scotch-Brite® abrasive cloth and degrease, perform adhesion test.

Glass:

Pre-existing coatings:

Remove old layers by sandblasting or mechanical grinding with P240-320 sandpaper, clean and degrease.

Products

ACR-178

Specifications

2K Acrylic DTM HP (Gloss)

DFT:

60-80 µ

Technical Documentation

Access to PDF

3-b

For interior and exterior parts

Zinc phosphate 2К Acrylic DTM with high atmosphericing resistance, high flexibility and high anticorrosive barrier. Recommended DFT = 60-80 µ.

Characteristics

Gloss:

Gloss

Layers:

Surface preparation

Steel:

Blast clean to Sa 2½ or hand clean to St 3.

Galvanized Steel:

Use Scotch-Brite® abrasive cloth and degrease, perform adhesion test.

Aluminium:

Sand with P280-320 sandpaper, clean and degrease, perform adhesion test.

Plastic Materials:

Wash with acetone, isopropyl alcohol or special solvents, use Scotch-Brite® abrasive cloth and degrease, perform adhesion test.

Glass:

Pre-existing coatings:

emove old layers by sandblasting or mechanical grinding with P240-320 sandpaper, clean and degrease.

Products

ACR-178

Specifications

2K Acrylic DTM HP (Gloss)

DFT:

60-80 µ

Technical Documentation

Access to PDF

3-c

For surfaces, with the exception of PE and PP, requiring resistance to atmospheric influences

Zinc phosphate 2К Acrylic DTM with high atmosphericing resistance and high flexibility.

Characteristics

Gloss:

Gloss

Layers:

Surface preparation

Steel:

Blast clean to Sa 2½ or hand clean to St 3.

Galvanized Steel:

Use Scotch-Brite® abrasive cloth and degrease, perform adhesion test.

Aluminium:

Sand with P280-320 sandpaper, clean and degrease, perform adhesion test.

Plastic Materials:

Wash with acetone, isopropyl alcohol or special solvents, use Scotch-Brite® abrasive cloth and degrease, perform adhesion test.

Glass:

Pre-existing coatings:

Remove old layers by sandblasting or mechanical grinding with P240-320 sandpaper, clean and degrease.

Products

ACR-178

Specifications

2K Acrylic DTM HP (Gloss)

DFT:

60-80 µ

Technical Documentation

Access to PDF

4-a

For surfaces that require resistance to atmospheric and/or chemical influences

Excellent resistance to light and atmospheric conditions. Recommended as a two-layers cycle where good corrosion protection and matt final appearance is required. Total DFT = 100-140 µ.

Characteristics

Gloss:

Matt

Layers:

Surface preparation

Steel:

Blast clean to Sa 2½ or hand clean to St 3.

Galvanized Steel:

Use Scotch-Brite® abrasive cloth and degrease, perform adhesion test.

Aluminium:

Sand with P280-320 sandpaper, clean and degrease, perform adhesion test.

Plastic Materials:

Wash with acetone, isopropyl alcohol or special solvents, use Scotch-Brite® abrasive cloth and degrease, perform adhesion test.

Glass:

Pre-existing coatings:

Remove old layers by sandblasting or mechanical grinding with P240-320 sandpaper, clean and degrease.

Products

ACR-020

Specifications

2K Acrylic Primer ZNP (Light-grey or beige)

DFT:

40-60 µ

ACR-131

Specifications

2K Acrylic DTM (Matt)

DFT:

60-80 µ

Technical Documentation

Access to PDF

5-a

For surfaces that require resistance to strong atmospheric influences

Excellent resistance to light and atmospheric conditions. Recommended as a two-layers cycle where good corrosion protection and semi-gloss final appearance is required. Total DFT = 100-140 µ.

Characteristics

Gloss:

Semi-gloss

Layers:

Surface preparation

Steel:

Blast clean to Sa 2½ or hand clean to St 3.

Galvanized Steel:

Use Scotch-Brite® abrasive cloth and degrease, perform adhesion test.

Aluminium:

Sand with P280-320 sandpaper, clean and degrease, perform adhesion test.

Plastic Materials:

Glass:

Pre-existing coatings:

Remove old layers by sandblasting or mechanical grinding with P240-320 sandpaper, clean and degrease.

Products

ACR-020

Specifications

2K Acrylic Primer ZNP (Light-grey or beige)

DFT:

40-60 µ

ACR-136

Specifications

2K Acrylic DTM (Semi-gloss)

DFT:

60-80 µ

Technical Documentation

Access to PDF

6-a

For surfaces that require resistance to strong atmospheric and/or mechanical influences

Excellent resistance to light and atmospheric conditions. Recommended as a two-layers cycle where good corrosion protection and matt final appearance is required. TOTAL DFT = 100-140 µ.

Characteristics

Gloss:

Gloss

Layers:

Surface preparation

Steel:

Blast clean to Sa 2½ or hand clean to St 3.

Galvanized Steel:

Use Scotch-Brite® abrasive cloth and degrease, perform adhesion test.

Aluminium:

Sand with P280-320 sandpaper, clean and degrease, perform adhesion test.

Plastic Materials:

Wash with acetone, isopropyl alcohol or special solvents, use Scotch-Brite® abrasive cloth and degrease, perform adhesion test.

Glass:

Pre-existing coatings:

Remove old layers by sandblasting or mechanical grinding with P240-320 sandpaper, clean and degrease.

Products

ACR-020

Specifications

2K Acrylic Primer ZNP (Light-grey or beige)

DFT:

40-60 µ

ACR-178

Specifications

2K Acrylic DTM HP (Gloss)

DFT:

60-80 µ

Technical Documentation

Access to PDF

7-a

For surfaces that require resistance to strong atmospheric influences

Excellent resistance to light and atmospheric conditions. Recommended as a two-layers cycle where good corrosion protection and semi-gloss final appearance is required. Total DFT = 70-120 µ.

Characteristics

Gloss:

Matt

Layers:

Surface preparation

Steel:

Blast clean to Sa 2½ or hand clean to St 3.

Galvanized Steel:

Use Scotch-Brite® abrasive cloth and degrease, perform adhesion test.

Aluminium:

Sand with P280-320 sandpaper, clean and degrease, perform adhesion test.

Plastic Materials:

Glass:

Pre-existing coatings:

Remove old layers by sandblasting or mechanical grinding with P240-320 sandpaper, clean and degrease.

Products

ACR-020

Specifications

2K Acrylic Primer ZNP (Light-grey or beige)

DFT:

40-60 µ

ACR-231

Specifications

2K Acrylic Topcoat (Matt Antiscratch)

DFT:

30-60 µ

Technical Documentation

Access to PDF

8-a

For surfaces that require resistance to strong atmospheric influences

Excellent resistance to light and atmospheric conditions. Recommended as a two-layers cycle where good corrosion protection and gloss final appearance is required. Total DFT = 65-95 µ.

Characteristics

Gloss:

Textured

Layers:

Surface preparation

Steel:

Blast clean to Sa 2½ or hand clean to St 3.

Galvanized Steel:

Use Scotch-Brite® abrasive cloth and degrease, perform adhesion test.

Aluminium:

Sand with P280-320 sandpaper, clean and degrease, perform adhesion test.

Plastic Materials:

Glass:

Pre-existing coatings:

Remove old layers by sandblasting or mechanical grinding with P240-320 sandpaper, clean and degrease.

Products

ACR-020

Specifications

2K Acrylic Primer ZNP (Light-grey or beige)

DFT:

40-60 µ

ACR-240

Specifications

2K Acrylic Topcoat (Textured)

DFT:

25-30 µ

Technical Documentation

Access to PDF

9-a

For surfaces that require resistance to strong atmospheric influences

Excellent resistance to light and atmospheric conditions. Recommended as a two-layers cycle where good corrosion protection and high-gloss final appearance is required. Recommended as a two-layers cycle where good corrosion protection and gloss final appearance is required. Total DFT = 70-120 µ.

Characteristics

Gloss:

High-gloss

Layers:

Surface preparation

Steel:

Blast clean to Sa 2½ or hand clean to St 3.

Galvanized Steel:

Use Scotch-Brite® abrasive cloth and degrease, perform adhesion test.

Aluminium:

Sand with P280-320 sandpaper, clean and degrease, perform adhesion test.

Plastic Materials:

Glass:

Pre-existing coatings:

Remove old layers by sandblasting or mechanical grinding with P240-320 sandpaper, clean and degrease.

Products

ACR-020

Specifications

2K Acrylic Primer ZNP (Light-grey or beige)

DFT:

40-60 µ

ACR-269

Specifications

2K Acrylic Topcoat (High-glossy)

DFT:

30-60 µ

Technical Documentation

Access to PDF

10-a

For surfaces that require resistance to strong atmospheric influences

Excellent resistance to light and atmospheric conditions. Recommended as a two-layers cycle where good corrosion protection and high-gloss final appearance is required. Total DFT = 70-120 µ.

Characteristics

Gloss:

High-gloss

Layers:

Surface preparation

Steel:

Blast clean to Sa 2½ or hand clean to St 3.

Galvanized Steel:

Use Scotch-Brite® abrasive cloth and degrease, perform adhesion test.

Aluminium:

Sand with P280-320 sandpaper, clean and degrease, perform adhesion test.

Plastic Materials:

Glass:

Pre-existing coatings:

Remove old layers by sandblasting or mechanical grinding with P240-320 sandpaper, clean and degrease.

Products

ACR-020

Specifications

2K Acrylic Primer ZNP (Light-grey or beige)

DFT:

40-60 µ

ACR-289

Specifications

2K Acrylic Topcoat HP (High-gloss)

DFT:

30-60 µ

Technical Documentation

Access to PDF

11-a

For surfaces that require resistance to strong atmospheric influences

Great adhesion and anticorrosive barrier, high body and filling property. Excellent resistance to light and atmospheric conditions. Recommended as a two-layers cycle where a matt final look is required. Total DFT = 70-230 µ.

Characteristics

Gloss:

Matt

Layers:

Surface preparation

Steel:

Blast clean to Sa 2½ or hand clean to St 3.

Galvanized Steel:

Use Scotch-Brite® abrasive cloth and degrease, perform adhesion test.

Aluminium:

Sand with P280-320 sandpaper, clean and degrease, perform adhesion test.

Plastic Materials:

Glass:

Pre-existing coatings:

Remove old layers by sandblasting or mechanical grinding with P240-320 sandpaper, clean and degrease.

Products

EPX-040

Specifications

2K Epoxy ZNP (Light-grey or beige)

DFT:

40-150 µ

ACR-131

Specifications

2K Acrylic DTM (Matt)

DFT:

60-80 µ

Technical Documentation

Access to PDF

12-a

For surfaces that require resistance to strong atmospheric influences

Great adhesion and anticorrosive barrier, high body and filling property. Excellent resistance to light and atmospheric conditions. Recommended as a two-layers cycle where a semi-gloss final look is required. Total DFT = 70-230 µ.

Characteristics

Gloss:

Semi-gloss

Layers:

Surface preparation

Steel:

Blast clean to Sa 2½ or hand clean to St 3.

Galvanized Steel:

Use Scotch-Brite® abrasive cloth and degrease, perform adhesion test.

Aluminium:

Sand with P280-320 sandpaper, clean and degrease, perform adhesion test.

Plastic Materials:

Glass:

Pre-existing coatings:

Remove old layers by sandblasting or mechanical grinding with P240-320 sandpaper, clean and degrease.

Products

EPX-040

Specifications

2K Epoxy ZNP (Light-grey or beige)

DFT:

40-150 µ

ACR-136

Specifications

2K Acrylic DTM (Semi-gloss)

DFT:

60-80 µ

Technical Documentation

Access to PDF

13-a

For surfaces requiring resistance to extremely strong atmospheric and/or mechanical influences

Characteristics

Gloss:

Gloss

Layers:

Surface preparation

Steel:

Blast clean to Sa 2½ or hand clean to St 3.

Galvanized Steel:

Use Scotch-Brite® abrasive cloth and degrease.

Aluminium:

Sand with P280-320 sandpaper, clean and degrease.

Plastic Materials:

Glass:

Pre-existing coatings:

Remove old layers by sandblasting or mechanical grinding with P240-320 sandpaper, clean and degrease.

Products

EPX-040

Specifications

2K Epoxy ZNP (Light-grey or beige)

DFT:

40-150 µ

ACR-178

Specifications

2K Acrylic DTM HP (Gloss)

DFT:

60-80 µ

Technical Documentation

Access to PDF

14-a

For surfaces requiring resistance to extremely strong atmospheric influences

Characteristics

Gloss:

Matt

Layers:

Surface preparation

Steel:

Blast clean to Sa 2½ or hand clean to St 3.

Galvanized Steel:

Use Scotch-Brite® abrasive cloth and degrease, perform adhesion test.

Aluminium:

Sand with P280-320 sandpaper, clean and degrease, perform adhesion test.

Plastic Materials:

Glass:

Pre-existing coatings:

Remove old layers by sandblasting or mechanical grinding with P240-320 sandpaper, clean and degrease.

Products

EPX-040

Specifications

2K Epoxy ZNP (Light-grey or beige)

DFT:

40-150 µ

ACR-231

Specifications

2K Acrylic Topcoat (Matt Antiscratch)

DFT:

30-60 µ

Technical Documentation

Access to PDF

15-a

For surfaces requiring resistance to extremely strong atmospheric influences

Great adhesion and anticorrosive barrier, high body and filling property. Excellent resistance to light and atmospheric conditions. Recommended as a two-layers cycle where a gloss final look is required. Total DFT = 70-210 µ.

Characteristics

Gloss:

Textured

Layers:

Surface preparation

Steel:

Blast clean to Sa 2½ or hand clean to St 3.

Galvanized Steel:

Use Scotch-Brite® abrasive cloth and degrease, perform adhesion test.

Aluminium:

Sand with P280-320 sandpaper, clean and degrease, perform adhesion test.

Plastic Materials:

Glass:

Pre-existing coatings:

Remove old layers by sandblasting or mechanical grinding with P240-320 sandpaper, clean and degrease.

Products

EPX-040

Specifications

2K Epoxy ZNP (Light-grey or beige)

DFT:

40-150 µ

ACR-240

Specifications

2K Acrylic Topcoat (Textured)

DFT:

25-30 µ

Technical Documentation

Access to PDF

16-a

For surfaces requiring resistance to extremely strong atmospheric and/or chemical influences

Great adhesion and anticorrosive barrier, high body and filling property. Excellent resistance to light and atmospheric conditions. Recommended as a two-layers cycle where a gloss final look is required. Recommended DFT of DTM = 30-80 µ; total DFT = 70-230 µ.

Characteristics

Gloss:

High-gloss

Layers:

Surface preparation

Steel:

Blast clean to Sa 2½ or hand clean to St 3.

Galvanized Steel:

Use Scotch-Brite® abrasive cloth and degrease, perform adhesion test.

Aluminium:

Sand with P280-320 sandpaper, clean and degrease, perform adhesion test.

Plastic Materials:

Glass:

Pre-existing coatings:

Remove old layers by sandblasting or mechanical grinding with P240-320 sandpaper, clean and degrease.

Products

EPX-040

Specifications

2K Epoxy ZNP (Light-grey or beige)

DFT:

40-150 µ

ACR-178

Specifications

2K Acrylic DTM HP (Gloss)

DFT:

60-80 µ

Technical Documentation

Access to PDF

17-a

For surfaces requiring resistance to extremely strong atmospheric influences

Great adhesion, anticorrosive barrier and chemical resistance. High body and filling property. Recommended for indoor use as a two-layers cycle where a semi-gloss final look is required. Total DFT = 90-210 µ.

Characteristics

Gloss:

High-gloss

Layers:

Surface preparation

Steel:

Blast clean to Sa 2½ or hand clean to St 3.

Galvanized Steel:

Use Scotch-Brite® abrasive cloth and degrease.

Aluminium:

Sand with P280-320 sandpaper, clean and degrease.

Plastic Materials:

Glass:

Pre-existing coatings:

Remove old layers by sandblasting or mechanical grinding with P240-320 sandpaper, clean and degrease.

Products

EPX-040

Specifications

2K Epoxy ZNP (Light-grey or beige)

DFT:

40-150 µ

ACR-289

Specifications

2K Acrylic Topcoat HP (High-gloss)

DFT:

30-60 µ

Technical Documentation

Access to PDF

18-a

For plastic parts, with the exception of PE and PP, requiring surface leveling and resistance to atmospheric and/or mechanical influences

Excellent resistance to light and atmospheric conditions. Recommended as a two-layers cycle where good corrosion protection and matt final appearance is required. Total DFT = 50-130 µ.

Characteristics

Gloss:

Matt

Layers:

Surface preparation

Steel:

Galvanized Steel:

Aluminium:

Plastic Materials:

Mashing with acetone, isopropyl alcohol or specific solvents.

Glass:

Pre-existing coatings:

Mechanical sanding P150-P240.

Products

ACR-030

Specifications

2K Acrylic Filler (Light-grey or beige)

DFT:

50-150 µ

ACR-131

Specifications

2K Acrylic DTM (Matt)

DFT:

60-80 µ

Technical Documentation

Access to PDF

19-a

For plastic parts, with the exception of PE and PP, requiring surface leveling and resistance to atmospheric influences

Excellent resistance to light and atmospheric conditions. Recommended as a two-layers cycle where good corrosion protection and gloss final appearance is required. Total DFT = 50-130 µ.

Characteristics

Gloss:

Semi-gloss

Layers:

Surface preparation

Steel:

Galvanized Steel:

Aluminium:

Plastic Materials:

Washing with acetone, isopropyl alcohol or specific solvents.

Glass:

Pre-existing coatings:

Mechanical sanding P150-P240.

Products

ACR-030

Specifications

2K Acrylic Filler (Light-grey or beige)

DFT:

50-150 µ

ACR-136

Specifications

2K Acrylic DTM (Semi-gloss)

DFT:

60-80 µ

Technical Documentation

Access to PDF