Q-Industrial — Aluminium

03-a.

For surfaces that require resistance to atmospheric and/or chemical influences

Zinc phosphate 2К Acrylic DTM with high chemical and atmosphericing resistance, high flexibility and high anticorrosive barrier.

Characteristics

Gloss:

Gloss

Layers:

1

Steel

Blast clean to Sa 2½ or hand clean to St 3.

Galvanized Steel

Use Scotch-Brite® abrasive cloth and degrease, perform adhesion test.

Aluminium

Sand with P280-320 sandpaper, clean and degrease, perform adhesion test.

Plastic Materials

Wash with acetone, isopropyl alcohol or special solvents, use Scotch-Brite® abrasive cloth and degrease, perform adhesion test.

Glass

Pre-existing coatings

Remove old layers by sandblasting or mechanical grinding with P240-320 sandpaper, clean and degrease.

ACR-178

Specifications

2K Acrylic DTM HP (Gloss)

DFT:

60-80 µ

Total DFT

60-80 µ

Technical Documentation

Access to PDF

11-a.

For surfaces requiring resistance to extremely strong atmospheric and/or mechanical influences

Great adhesion and anticorrosive barrier, high body and filling property. Excellent resistance to light and atmospheric conditions. Recommended as a two-layers cycle where a matt final look is required.

Characteristics

Gloss:

Matt

Layers:

2

Steel

Blast clean to Sa 2½ or hand clean to St 3.

Galvanized Steel

Use Scotch-Brite® abrasive cloth and degrease, perform adhesion test.

Aluminium

Sand with P280-320 sandpaper, clean and degrease, perform adhesion test.

Plastic Materials

Glass

Pre-existing coatings

Remove old layers by sandblasting or mechanical grinding with P240-320 sandpaper, clean and degrease.

EPX-040

Specifications

2K Epoxy ZNP (Light-grey or beige)

DFT:

40-150 µ

ACR-131

Specifications

2K Acrylic DTM (Matt)

DFT:

60-80 µ

Total DFT

70-230 µ

Technical Documentation

Access to PDF

16-a.

For surfaces requiring resistance to extremely strong atmospheric influences

Great adhesion and anticorrosive barrier, high body and filling property. Excellent resistance to light and atmospheric conditions. Recommended as a two-layers cycle where a high-gloss final look is required.

Characteristics

Gloss:

High-gloss

Layers:

2

Steel

Blast clean to Sa 2½ or hand clean to St 3.

Galvanized Steel

Use Scotch-Brite® abrasive cloth and degrease.

Aluminium

Sand with P280-320 sandpaper, clean and degrease.

Plastic Materials

Glass

Pre-existing coatings

Remove old layers by sandblasting or mechanical grinding with P240-320 sandpaper, clean and degrease.

EPX-040

Specifications

2K Epoxy ZNP (Light-grey or beige)

DFT:

40-150 µ

ACR-269

Specifications

2K Acrylic Topcoat (High-glossy)

DFT:

30-60 µ

Total DFT

90-210 µ

Technical Documentation

Access to PDF

Aluminium

Essential Technologies

Explore More