Q-Industrial — Technologies

20-a

For plastic parts, with the exception of PE and PP, requiring surface leveling and resistance to atmospheric influences

Excellent resistance to light and atmospheric conditions. Recommended as a two-layers cycle where good corrosion protection and high-gloss final appearance is required. Total DFT = 50-130 µ.

Characteristics

Gloss:

High-gloss

Layers:

Surface preparation

Steel:

Galvanized Steel:

Aluminium:

Plastic Materials:

Washing with acetone, isopropyl alcohol or specific solvents.

Glass:

Pre-existing coatings:

Mechanical sanding P150-P240.

Products

ACR-030

Specifications

2K Acrylic Filler (Light-grey or beige)

DFT:

50-150 µ

ACR-269

Specifications

2K Acrylic Topcoat (High-glossy)

DFT:

30-60 µ

Technical Documentation

Access to PDF

21-a

For plastic parts, including PE and PP, glass and old coatings, requiring resistance to atmospheric and/or mechanical influences

Excellent adhesion to plastic and other problematic surfaces. Excellent resistance to light and atmospheric conditions. Recommended for painting plastic with a matt effect. Total DFT = 35-65 µ.

Characteristics

Gloss:

Matt

Layers:

Surface preparation

Steel:

Galvanized Steel:

Aluminium:

Plastic Materials:

Must be degreased with acetone, isopropyl alcohol or specific solvents (xylene or butyl acetate), treated with Scotch-Brite® and degreased again.

Glass:

Must be degreased with acetone, isopropyl alcohol or specific solvents (xylene or butyl acetate), treated with Scotch-Brite® and degreased again.

Pre-existing coatings:

Remove old layers by sandblasting or mechanical grinding with P240-320 sandpaper, clean and degrease.

Products

PLP-070

Specifications

1K Plastic Primer (Transparent)

DFT:

2-5 µ

ACR-231

Specifications

2K Acrylic Topcoat (Matt Antiscratch)

DFT:

30-60 µ

Technical Documentation

Access to PDF

22-a

For plastic parts, including PE and PP, glass and old coatings, requiring resistance to atmospheric influences

Excellent adhesion to plastic and other problematic surfaces. Excellent resistance to light and atmospheric conditions. Recommended for painting plastic with a semi-gloss effect. Total DFT = 35-65 µ.

Characteristics

Gloss:

Gloss

Layers:

Surface preparation

Steel:

Galvanized Steel:

Aluminium:

Plastic Materials:

Must be degreased with acetone, isopropyl alcohol or specific solvents (xylene or butyl acetate), treated with Scotch-Brite® and degreased again.

Glass:

Must be degreased with acetone, isopropyl alcohol or specific solvents (xylene or butyl acetate), treated with Scotch-Brite® and degreased again.

Pre-existing coatings:

Remove old layers by sandblasting or mechanical grinding with P240-320 sandpaper, clean and degrease.

Products

PLP-070

Specifications

1K Plastic Primer (Transparent)

DFT:

2-5 µ

ACR-136

Specifications

2K Acrylic DTM (Semi-gloss)

DFT:

60-80 µ

Technical Documentation

Access to PDF

23-a

For plastic parts, including PE and PP, glass and old coatings, requiring resistance to atmospheric influences

Excellent adhesion to plastic and other problematic surfaces. Excellent resistance to light and atmospheric conditions. Recommended for painting plastic with a textured effect. Total DFT = 35-65 µ.

Characteristics

Gloss:

Textured

Layers:

Surface preparation

Steel:

Galvanized Steel:

Aluminium:

Plastic Materials:

Must be degreased with acetone, isopropyl alcohol or specific solvents (xylene or butyl acetate), treated with Scotch-Brite® and degreased again.

Glass:

Must be degreased with acetone, isopropyl alcohol or specific solvents (xylene or butyl acetate), treated with Scotch-Brite® and degreased again.

Pre-existing coatings:

Remove old layers by sandblasting or mechanical grinding with P240-320 sandpaper, clean and degrease.

Products

PLP-070

Specifications

1K Plastic Primer (Transparent)

DFT:

2-5 µ

ACR-240

Specifications

2K Acrylic Topcoat (Textured)

DFT:

25-30 µ

Technical Documentation

Access to PDF

24-a

For plastic parts, including PE and PP, glass and old coatings, requiring resistance to atmospheric influences

Excellent adhesion to plastic and other problematic surfaces. Excellent resistance to light and atmospheric conditions. Recommended for painting plastic with a high-gloss effect. Total DFT = 35-65 µ.

Characteristics

Gloss:

High-gloss

Layers:

Surface preparation

Steel:

Galvanized Steel:

Aluminium:

Plastic Materials:

Must be degreased with acetone, isopropyl alcohol or specific solvents (xylene or butyl acetate), treated with Scotch-Brite® and degreased again.

Glass:

Must be degreased with acetone, isopropyl alcohol or specific solvents (xylene or butyl acetate), treated with Scotch-Brite® and degreased again.

Pre-existing coatings:

Remove old layers by sandblasting or mechanical grinding with P240-320 sandpaper, clean and degrease.

Products

PLP-070

Specifications

1K Plastic Primer (Transparent)

DFT:

2-5 µ

ACR-269

Specifications

2K Acrylic Topcoat (High-glossy)

DFT:

30-60 µ

Technical Documentation

Access to PDF

25-a

For surfaces requiring resistance to extremely strong atmospheric influences

Great adhesion, high body and filling property. Great anticorrosive barrier. Good resistance to sunlight. Shiny appearance. Total DFT = 110-180 µ.

Characteristics

Gloss:

High-gloss

Layers:

Surface preparation

Steel:

Blast clean to Sa 2½ or hand clean to St 3.

Galvanized Steel:

Use Scotch-Brite® abrasive cloth and degrease.

Aluminium:

Sand with P280-320 sandpaper, clean and degrease.

Plastic Materials:

Glass:

Pre-existing coatings:

Remove old layers by sandblasting or mechanical grinding with P240-320 sandpaper, clean and degrease.

Products

EPX-040

Specifications

2K Epoxy ZNP (Light-grey or beige)

DFT:

40-150 µ

ACR-030

Specifications

2K Acrylic Filler (Light-grey or beige)

DFT:

50-150 µ

ACR-269

Specifications

2K Acrylic Topcoat (High-glossy)

DFT:

30-60 µ

Technical Documentation

Access to PDF

25-b

Bodies

Great adhesion, high body and filling property. Great anticorrosive barrier. Good resistance to sunlight. Shiny appearance. Total DFT = 110-180 µ.

Characteristics

Gloss:

High-gloss

Layers:

Surface preparation

Steel:

Blast clean to Sa 2½ or hand clean to St 3.

Galvanized Steel:

Use Scotch-Brite® abrasive cloth and degrease.

Aluminium:

Sand with P280-320 sandpaper, clean and degrease.

Plastic Materials:

Glass:

Pre-existing coatings:

Remove old layers by sandblasting or mechanical grinding with P240-320 sandpaper, clean and degrease.

Products

EPX-040

Specifications

2K Epoxy ZNP (Light-grey or beige)

DFT:

40-150 µ

ACR-030

Specifications

2K Acrylic Filler (Light-grey or beige)

DFT:

50-150 µ

ACR-269

Specifications

2K Acrylic Topcoat (High-glossy)

DFT:

30-60 µ

Technical Documentation

Access to PDF

27-a

For surfaces requiring resistance to extremely strong atmospheric influences

Great adhesion, high body and filling property. Great anticorrosive barrier. Good resistance to sunlight. Shiny appearance. Total DFT = 100-180 µ.

Characteristics

Gloss:

High-gloss

Layers:

Surface preparation

Steel:

Blast clean to Sa 2½ or hand clean to St 3.

Galvanized Steel:

Use Scotch-Brite® abrasive cloth and degrease.

Aluminium:

Sand with P280-320 sandpaper, clean and degrease.

Plastic Materials:

Glass:

Pre-existing coatings:

Remove old layers by sandblasting or mechanical grinding with P240-320 sandpaper, clean and degrease.

Products

EPX-040

Specifications

2K Epoxy ZNP (Light-grey or beige)

DFT:

40-150 µ

ACR-030

Specifications

2K Acrylic Filler (Light-grey or beige)

DFT:

50-150 µ

ACR-289

Specifications

2K Acrylic Topcoat HP (High-gloss)

DFT:

30-60 µ

Technical Documentation

Access to PDF

26-b

Bodies

Great adhesion, high body and filling property. Great anticorrosive barrier. Good resistance to sunlight. Shiny appearance. Total DFT = 110-180 µ.

Characteristics

Gloss:

High-gloss

Layers:

Surface preparation

Steel:

Blast clean to Sa 2½ or hand clean to St 3.

Galvanized Steel:

Use Scotch-Brite® abrasive cloth and degrease.

Aluminium:

Sand with P280-320 sandpaper, clean and degrease.

Plastic Materials:

Glass:

Pre-existing coatings:

Remove old layers by sandblasting or mechanical grinding with P240-320 sandpaper, clean and degrease.

Products

EPX-040

Specifications

2K Epoxy ZNP (Light-grey or beige)

DFT:

40-150 µ

ACR-030

Specifications

2K Acrylic Filler (Light-grey or beige)

DFT:

50-150 µ

ACR-289

Specifications

2K Acrylic Topcoat HP (High-gloss)

DFT:

30-60 µ

Technical Documentation

Access to PDF