Q-Industrial — Steel

Essential Technologies

01-a.

For surfaces that require resistance to atmospheric and/or mechanical influences

Zinc phosphate 2К Acrylic DTM with high atmosphericing and mechanical resistance, high flexibility and high anticorrosive barrier.

Characteristics

Gloss:

Semi-matt

Layers:

Steel

Blast clean to Sa 2½ or hand clean to St 3.

Galvanized Steel

Use Scotch-Brite® abrasive cloth and degrease, perform adhesion test.

Aluminium

Sand with P280-320 sandpaper, clean and degrease, perform adhesion test.

Plastic Materials

Wash with acetone, isopropyl alcohol or special solvents, use Scotch-Brite® abrasive cloth and degrease, perform adhesion test.

Glass

Pre-existing coatings

Remove old layers by sandblasting or mechanical grinding with P240-320 sandpaper, clean and degrease.

ACR-131

Specifications

2K Acrylic DTM (Matt)

DFT:

30-80 µ

Total DFT

Technical Documentation

Access to PDF

07-a.

For surfaces that require resistance to strong atmospheric influences

Excellent resistance to light and atmospheric conditions. Recommended as a two-layers cycle where good corrosion protection and semi-gloss final appearance is required.

Characteristics

Gloss:

High-gloss

Layers:

Steel

Blast clean to Sa 2½ or hand clean to St 3.

Galvanized Steel

Use Scotch-Brite® abrasive cloth and degrease, perform adhesion test.

Aluminium

Sand with P280-320 sandpaper, clean and degrease, perform adhesion test.

Plastic Materials

Glass

Pre-existing coatings

Remove old layers by sandblasting or mechanical grinding with P240-320 sandpaper, clean and degrease.

ACR-020

Specifications

2K Acrylic Primer ZNP (Light-grey or beige)

DFT:

40-60 µ

ACR-136

Specifications

2K Acrylic DTM (Semi-glossy)

DFT:

30-80 µ

Total DFT

100-140 µ

Technical Documentation

Access to PDF

19-a.

For surfaces requiring resistance to extremely strong atmospheric influences

Great adhesion and anticorrosive barrier, high body and filling property. Excellent resistance to light and atmospheric conditions. Recommended as a two-layers cycle where a high-gloss final look is required.

Characteristics

Gloss:

High-gloss

Layers:

Steel

Blast clean to Sa 2½ or hand clean to St 3.

Galvanized Steel

Use Scotch-Brite® abrasive cloth and degrease, perform adhesion test.

Aluminium

Sand with P280-320 sandpaper, clean and degrease, perform adhesion test.

Plastic Materials

Glass

Pre-existing coatings

Remove old layers by sandblasting or mechanical grinding with P240-320 sandpaper, clean and degrease.

EPX-040

Specifications

2K Epoxy ZNP (Light-grey or beige)

DFT:

40-150 µ

ACR-269

Specifications

2K Acrylic Topcoat (High-glossy)

DFT:

30-60 µ

Total DFT

90-210 µ

Technical Documentation

Access to PDF

Steel

Essential Technologies

Explore More