Q-Industrial — Machine tool and other equipment production

05-a.

For indoor use in chemically aggressive environments

Zinc phosphate 2К Epoxy DTM. Great impermeability, excellent chemical resistance and film toughness. High flexibility, high resilience.

Characteristics

Gloss:

Semi-gloss

Layers:

1

Steel

Blast clean to Sa 2½ or hand clean to St 3.

Galvanized Steel

Use Scotch-Brite® abrasive cloth and degrease, perform adhesion test.

Aluminium

Sand with P280-320 sandpaper, clean and degrease, perform adhesion test.

Plastic Materials

Glass

Pre-existing coatings

Remove old layers by sandblasting or mechanical grinding with P240-320 sandpaper, clean and degrease.

EPX-155

Specifications

2K Epoxy DTM (Semi-glossy)

DFT:

30-300 µ

Total DFT

Technical Documentation

Access to PDF

17-a.

For indoor use in chemically aggressive environments

Great adhesion and anticorrosive barrier, high body and filling property. Excellent resistance to light and atmospheric conditions. Recommended as a two-layers cycle where a textured final look is required.

Characteristics

Gloss:

Semi-gloss

Layers:

2

Steel

Blast clean to Sa 2½ or hand clean to St 3.

Galvanized Steel

Use Scotch-Brite® abrasive cloth and degrease, perform adhesion test.

Aluminium

Sand with P280-320 sandpaper, clean and degrease, perform adhesion test.

Plastic Materials

Glass

Pre-existing coatings

Remove old layers by sandblasting or mechanical grinding with P240-320 sandpaper, clean and degrease.

EPX-040

Specifications

2K Epoxy ZNP (Light-grey or beige)

DFT:

40-150 µ

EPX-155

Specifications

2K Epoxy DTM (Semi-glossy)

DFT:

30-300 µ

Total DFT

70-300 µ

Technical Documentation

Access to PDF

19-a.

For surfaces requiring resistance to extremely strong atmospheric influences

Great adhesion and anticorrosive barrier, high body and filling property. Excellent resistance to light and atmospheric conditions. Recommended as a two-layers cycle where a high-gloss final look is required.

Characteristics

Gloss:

High-gloss

Layers:

2

Steel

Blast clean to Sa 2½ or hand clean to St 3.

Galvanized Steel

Use Scotch-Brite® abrasive cloth and degrease, perform adhesion test.

Aluminium

Sand with P280-320 sandpaper, clean and degrease, perform adhesion test.

Plastic Materials

Glass

Pre-existing coatings

Remove old layers by sandblasting or mechanical grinding with P240-320 sandpaper, clean and degrease.

EPX-040

Specifications

2K Epoxy ZNP (Light-grey or beige)

DFT:

40-150 µ

ACR-269

Specifications

2K Acrylic Topcoat (High-glossy)

DFT:

30-60 µ

Total DFT

120-180 µ

Technical Documentation

Access to PDF

Machine tool and other equipment production

Essential Technologies

Explore More