Great adhesion, anticorrosive barrier and chemical resistance. High body and filling property. Recommended for indoor use as a two-layers cycle where a semi-gloss final look is required.
Steel
Blast clean to Sa 2½ or hand clean to St 3.
Galvanized Steel
Use Scotch-Brite® abrasive cloth and degrease, perform adhesion test.
Aluminium
Sand with P280-320 sandpaper, clean and degrease, perform adhesion test.
Pre-existing coatings
Remove old layers by sandblasting or mechanical grinding with P240-320 sandpaper, clean and degrease.
EPX-040
Specifications
2K Epoxy ZNP (Light-grey or beige)
EPX-155
Specifications
2K Epoxy DTM (Semi-glossy)
.webp){kind=spacer}
