Q-Industrial — Plastic

Essential Technologies

01-c.

For surfaces, with the exception of PE and PP, requiring resistance to atmospheric and/or mechanical influences

Zinc phosphate 2К Acrylic DTM with high atmosphericing and mechanical resistance, high flexibility and high anticorrosive barrier.

Characteristics

Gloss:

Matt

Layers:

Steel

Blast clean to Sa 2½ or hand clean to St 3.

Galvanized Steel

Use Scotch-Brite® abrasive cloth and degrease, perform adhesion test.

Aluminium

Sand with P280-320 sandpaper, clean and degrease, perform adhesion test.

Plastic Materials

wash with acetone, isopropyl alcohol or special solvents, use Scotch-Brite® abrasive cloth and degrease, perform adhesion test.

Glass

Pre-existing coatings

Remove old layers by sandblasting or mechanical grinding with P240-320 sandpaper, clean and degrease.

ACR-131

Specifications

2K Acrylic DTM (Matt)

DFT:

30-80 µ

Total DFT

Technical Documentation

Access to PDF

21-a.

For plastic parts, with the exception of PE and PP, requiring surface leveling and resistance to atmospheric and/or mechanical influences

Excellent resistance to light and atmospheric conditions. Recommended as a two-layers cycle where good corrosion protection and matt final appearance is required.

Characteristics

Gloss:

Matt

Layers:

Steel

Galvanized Steel

Aluminium

Plastic Materials

Washing with acetone, isopropyl alcohol or specific solvents. Pre-existing coatings: mechanical sanding P150-P240.

Glass

Pre-existing coatings

ACR-030

Specifications

2K Acrylic Filler (Light-grey or beige)

DFT:

50-150 µ

ACR-131

Specifications

2K Acrylic DTM (Matt)

DFT:

30-80 µ

Total DFT

50-130 µ

Technical Documentation

Access to PDF

26-a.

For plastic parts, including PE and PP, glass and old coatings, requiring resistance to atmospheric influences

Excellent adhesion to plastic and other problematic surfaces. Excellent resistance to light and atmospheric conditions. Recommended for painting plastic with a gloss effect.

Characteristics

Gloss:

Gloss

Layers:

Steel

Galvanized Steel

Aluminium

Plastic Materials

Must be degreased with acetone, isopropyl alcohol or specific solvents (xylene or butyl acetate), treated with Scotch-Brite® and degreased again.

Glass

Must be degreased with acetone, isopropyl alcohol or specific solvents (xylene or butyl acetate), treated with Scotch-Brite® and degreased again.

Pre-existing coatings

Remove old layers by sandblasting or mechanical grinding with P240-320 sandpaper, clean and degrease.

PLP-070

Specifications

1K Plastic Primer (Transparent)

DFT:

2-5 µ

ACR-138

Specifications

2K Acrylic DTM (Glossy)

DFT:

30-80 µ

Total DFT

35-65 µ

Technical Documentation

Access to PDF

Plastic

Essential Technologies

Explore More