Q-Industrial — Technologies

17-b

For parts not exposed to UV

Great adhesion, anticorrosive barrier and chemical resistance. High body and filling property. Recommended for indoor use as a two-layers cycle where a semi-gloss final look is required. Recommended DFT of DTM = 30-150 µ; total DFT = 70-300 µ.

Characteristics

Gloss:

Semi-gloss

Layers:

Surface preparation

Steel:

Blast clean to Sa 2½ or hand clean to St 3.

Galvanized Steel:

Use Scotch-Brite® abrasive cloth and degrease, perform adhesion test.

Aluminium:

Sand with P280-320 sandpaper, clean and degrease, perform adhesion test.

Plastic Materials:

Glass:

Pre-existing coatings:

Remove old layers by sandblasting or mechanical grinding with P240-320 sandpaper, clean and degrease.

Products

EPX-040

Specifications

2K Epoxy ZNP (Light-grey or beige)

DFT:

40-150 µ

ACR-131

Specifications

2K Acrylic DTM (Matt)

DFT:

30-80 µ

Technical Documentation

Access to PDF

18-a

For surfaces requiring resistance to extremely strong atmospheric influences

Great adhesion and anticorrosive barrier, high body and filling property. Excellent resistance to light and atmospheric conditions. Recommended as a two-layers cycle where a textured final look is required. Recommended total DFT = 70-180 µ.

Characteristics

Gloss:

Textured

Layers:

Surface preparation

Steel:

Blast clean to Sa 2½ or hand clean to St 3.

Galvanized Steel:

Use Scotch-Brite® abrasive cloth and degrease, perform adhesion test.

Aluminium:

Sand with P280-320 sandpaper, clean and degrease, perform adhesion test.

Plastic Materials:

Glass:

Pre-existing coatings:

Remove old layers by sandblasting or mechanical grinding with P240-320 sandpaper, clean and degrease

Products

EPX-040

Specifications

2K Epoxy ZNP (Light-grey or beige)

DFT:

40-150 µ

ACR-240

Specifications

2K Acrylic Topcoat (Textured)

DFT:

25-30 µ

Technical Documentation

Access to PDF

19-a

For surfaces requiring resistance to extremely strong atmospheric influences

Great adhesion and anticorrosive barrier, high body and filling property. Excellent resistance to light and atmospheric conditions. Recommended as a two-layers cycle where a high-gloss final look is required. Recommended total DFT = 70-210 µ.

Characteristics

Gloss:

High-gloss

Layers:

Surface preparation

Steel:

Blast clean to Sa 2½ or hand clean to St 3.

Galvanized Steel:

Use Scotch-Brite® abrasive cloth and degrease, perform adhesion test.

Aluminium:

Sand with P280-320 sandpaper, clean and degrease, perform adhesion test.

Plastic Materials:

Glass:

Pre-existing coatings:

Remove old layers by sandblasting or mechanical grinding with P240-320 sandpaper, clean and degrease.

Products

EPX-040

Specifications

2K Epoxy ZNP (Light-grey or beige)

DFT:

40-150 µ

ACR-269

Specifications

2K Acrylic Topcoat (High-glossy)

DFT:

30-60 µ

Technical Documentation

Access to PDF

20-a

For surfaces requiring resistance to extremely strong atmospheric influences

Great adhesion and anticorrosive barrier, high body and filling property. Excellent resistance to light and atmospheric conditions. Recommended as a two-layers cycle where a high-gloss final look is required. Recommended total DFT = 70-210 µ.

Characteristics

Gloss:

High-gloss

Layers:

Surface preparation

Steel:

Blast clean to Sa 2½ or hand clean to St 3.

Galvanized Steel:

Use Scotch-Brite® abrasive cloth and degrease, perform adhesion test.

Aluminium:

Sand with P280-320 sandpaper, clean and degrease, perform adhesion test.

Plastic Materials:

Glass:

Pre-existing coatings:

Remove old layers by sandblasting or mechanical grinding with P240-320 sandpaper, clean and degrease.

Products

EPX-040

Specifications

2K Epoxy ZNP (Light-grey or beige)

DFT:

40-150 µ

ACR-289

Specifications

2K Acrylic Topcoat HP (High-glossy)

DFT:

30-60 µ

Technical Documentation

Access to PDF

21-a

For plastic parts, with the exception of PE and PP, requiring surface leveling and resistance to atmospheric and/or mechanical influences

Excellent resistance to light and atmospheric conditions. Recommended as a two-layers cycle where good corrosion protection and matt final appearance is required. Sanding of filler with P320-400 paper. Recommended DFT of DTM = 30-60 µ, total DFT = 60-140 µ.

Characteristics

Gloss:

Matt

Layers:

Surface preparation

Steel:

Galvanized Steel:

Aluminium:

Plastic Materials:

Washing with acetone, isopropyl alcohol or specific solvents.

Glass:

Pre-existing coatings:

Mechanical sanding P150-P240.

Products

ACR-030

Specifications

2K Acrylic Filler (Light-grey or beige)

DFT:

50-150 µ

ACR-131

Specifications

2K Acrylic DTM (Matt)

DFT:

30-80 µ

Technical Documentation

Access to PDF

22-a

For plastic parts, with the exception of PE and PP, requiring surface leveling and resistance to atmospheric influences

Excellent resistance to light and atmospheric conditions. Recommended as a two-layers cycle where good corrosion protection and semi-gloss final appearance is required. Sanding of filler with P320-400 paper. Recommended DFT of DTM = 30-60 µ, total DFT = 60-140 µ.

Characteristics

Gloss:

Semi-gloss

Layers:

Surface preparation

Steel:

Galvanized Steel:

Aluminium:

Plastic Materials:

Washing with acetone, isopropyl alcohol or specific solvents.

Glass:

Pre-existing coatings:

Mechanical sanding P150-P240.

Products

ACR-030

Specifications

2K Acrylic Filler (Light-grey or beige)

DFT:

50-150 µ

ACR-136

Specifications

2K Acrylic DTM (Semi-glossy)

DFT:

30-80 µ

Technical Documentation

Access to PDF

23-a

For plastic parts, with the exception of PE and PP, requiring surface leveling and resistance to atmospheric influences

Excellent resistance to light and atmospheric conditions. Recommended as a two-layers cycle where good corrosion protection and gloss final appearance is required. Sanding of filler with P320-400 paper. Recommended DFT of DTM = 30-60 µ, total DFT = 60-140 µ.

Characteristics

Gloss:

Gloss

Layers:

Surface preparation

Steel:

Galvanized Steel:

Aluminium:

Plastic Materials:

Washing with acetone, isopropyl alcohol or specific solvents.

Glass:

Pre-existing coatings:

Mechanical sanding P150-P240.

Products

ACR-030

Specifications

2K Acrylic Filler (Light-grey or beige)

DFT:

50-150 µ

ACR-138

Specifications

2K Acrylic DTM (Glossy)

DFT:

30-80 µ

Technical Documentation

Access to PDF

24-a

For plastic parts, with the exception of PE and PP, requiring surface leveling and resistance to atmospheric influences

Excellent resistance to light and atmospheric conditions. Recommended as a two-layers cycle where good corrosion protection and high-gloss final appearance is required. Sanding of filler with P320-400 paper. Recommended total DFT = 60-140 µ.

Characteristics

Gloss:

High-gloss

Layers:

Surface preparation

Steel:

Galvanized Steel:

Aluminium:

Plastic Materials:

Washing with acetone, isopropyl alcohol or specific solvents.

Glass:

Pre-existing coatings:

Mechanical sanding P150-P240.

Products

ACR-030

Specifications

2K Acrylic Filler (Light-grey or beige)

DFT:

50-150 µ

ACR-269

Specifications

2K Acrylic Topcoat (High-glossy)

DFT:

30-60 µ

Technical Documentation

Access to PDF

25-a

For plastic parts, including PE and PP, glass and old coatings, requiring resistance to atmospheric and/or mechanical influences

Excellent adhesion to plastic and other problematic surfaces. Excellent resistance to light and atmospheric conditions. Recommended for painting plastic with a matt effect. Recommended DFT of DTM = 30-60 µ, total DFT = 35-65 µ.

Characteristics

Gloss:

Matt

Layers:

Surface preparation

Steel:

Galvanized Steel:

Aluminium:

Plastic Materials:

Must be degreased with acetone, isopropyl alcohol or specific solvents (xylene or butyl acetate), treated with Scotch-Brite® and degreased again.

Glass:

Must be degreased with acetone, isopropyl alcohol or specific solvents (xylene or butyl acetate), treated with Scotch-Brite® and degreased again.

Pre-existing coatings:

Remove old layers by sandblasting or mechanical grinding with P240-320 sandpaper, clean and degrease.

Products

PLP-070

Specifications

1K Plastic Primer (Transparent)

DFT:

2-5 µ

ACR-131

Specifications

2K Acrylic DTM (Matt)

DFT:

30-80 µ

Technical Documentation

Access to PDF

26-a

For plastic parts, including PE and PP, glass and old coatings, requiring resistance to atmospheric influences

Excellent adhesion to plastic and other problematic surfaces. Excellent resistance to light and atmospheric conditions. Recommended for painting plastic with a gloss effect. Recommended DFT of DTM = 30-60 µ, total DFT = 35-65 µ.

Characteristics

Gloss:

Gloss

Layers:

Surface preparation

Steel:

Galvanized Steel:

Aluminium:

Plastic Materials:

Must be degreased with acetone, isopropyl alcohol or specific solvents (xylene or butyl acetate), treated with Scotch-Brite® and degreased again.

Glass:

Must be degreased with acetone, isopropyl alcohol or specific solvents (xylene or butyl acetate), treated with Scotch-Brite® and degreased again.

Pre-existing coatings:

Remove old layers by sandblasting or mechanical grinding with P240-320 sandpaper, clean and degrease.

Products

PLP-070

Specifications

1K Plastic Primer (Transparent)

DFT:

2-5 µ

ACR-138

Specifications

2K Acrylic DTM (Glossy)

DFT:

30-80 µ

Technical Documentation

Access to PDF

27-a

For plastic parts, including PE and PP, glass and old coatings, requiring resistance to atmospheric influences

Excellent adhesion to plastic and other problematic surfaces. Excellent resistance to light and atmospheric conditions. Recommended for painting plastic with a textured effect. Recommended total DFT = 30-35 µ.

Characteristics

Gloss:

Textured

Layers:

Surface preparation

Steel:

Galvanized Steel:

Aluminium:

Plastic Materials:

Must be degreased with acetone, isopropyl alcohol or specific solvents (xylene or butyl acetate), treated with Scotch-Brite® and degreased again.

Glass:

Must be degreased with acetone, isopropyl alcohol or specific solvents (xylene or butyl acetate), treated with Scotch-Brite® and degreased again.

Pre-existing coatings:

Remove old layers by sandblasting or mechanical grinding with P240-320 sandpaper, clean and degrease.

Products

PLP-070

Specifications

1K Plastic Primer (Transparent)

DFT:

2-5 µ

ACR-240

Specifications

2K Acrylic Topcoat (Textured)

DFT:

25-30 µ

Technical Documentation

Access to PDF

28-a

For plastic parts, including PE and PP, glass and old coatings, requiring resistance to atmospheric influences

Excellent adhesion to plastic and other problematic surfaces. Excellent resistance to light and atmospheric conditions. Recommended for painting plastic with a high-gloss effect. Recommended total DFT = 35-65 µ.

Characteristics

Gloss:

High-gloss

Layers:

Surface preparation

Steel:

Galvanized Steel:

Aluminium:

Plastic Materials:

Must be degreased with acetone, isopropyl alcohol or specific solvents (xylene or butyl acetate), treated with Scotch-Brite® and degreased again.

Glass:

Must be degreased with acetone, isopropyl alcohol or specific solvents (xylene or butyl acetate), treated with Scotch-Brite® and degreased again.

Pre-existing coatings:

Remove old layers by sandblasting or mechanical grinding with P240-320 sandpaper, clean and degrease.

Products

PLP-070

Specifications

1K Plastic Primer (Transparent)

DFT:

2-5 µ

ACR-269

Specifications

2K Acrylic Topcoat (High-glossy)

DFT:

30-60 µ

Technical Documentation

Access to PDF

29-a

For surfaces requiring resistance to extremely strong atmospheric influences

Great adhesion, high body and filling property. Great anticorrosive barrier. Good resistance to sunlight. Shiny appearance. Recommended DFT of primer = 40-50 µ, DFT of filler = 120-150 µ, sanding with P320-400 paper. Total DFT = 120-200 µ.

Characteristics

Gloss:

High-gloss

Layers:

Surface preparation

Steel:

Blast clean to Sa 2½ or hand clean to St 3.

Galvanized Steel:

Use Scotch-Brite® abrasive cloth and degrease.

Aluminium:

Sand with P280-320 sandpaper, clean and degrease.

Plastic Materials:

Glass:

Pre-existing coatings:

Remove old layers by sandblasting or mechanical grinding with P240-320 sandpaper, clean and degrease.

Products

EPX-040

Specifications

2K Epoxy ZNP (Light-grey or beige)

DFT:

40-150 µ

ACR-030

Specifications

2K Acrylic Filler (Light-grey or beige)

DFT:

50-150 µ

ACR-269

Specifications

2K Acrylic Topcoat (High-glossy)

DFT:

30-60 µ

Technical Documentation

Access to PDF

29-b

Body

Characteristics

Gloss:

High-gloss

Layers:

Surface preparation

Steel:

Blast clean to Sa 2½ or hand clean to St 3.

Galvanized Steel:

Use Scotch-Brite® abrasive cloth and degrease.

Aluminium:

Sand with P280-320 sandpaper, clean and degrease.

Plastic Materials:

Glass:

Pre-existing coatings:

Remove old layers by sandblasting or mechanical grinding with P240-320 sandpaper, clean and degrease.

Products

EPX-040

Specifications

2K Epoxy ZNP (Light-grey or beige)

DFT:

40-150 µ

ACR-030

Specifications

2K Acrylic Filler (Light-grey or beige)

DFT:

50-150 µ

ACR-269

Specifications

2K Acrylic Topcoat (High-glossy)

DFT:

30-60 µ

Technical Documentation

Access to PDF

30-a

For surfaces requiring resistance to extremely strong atmospheric influences

Characteristics

Gloss:

High-gloss

Layers:

Surface preparation

Steel:

Blast clean to Sa 2½ or hand clean to St 3.

Galvanized Steel:

Use Scotch-Brite® abrasive cloth and degrease.

Aluminium:

Sand with P280-320 sandpaper, clean and degrease.

Plastic Materials:

Glass:

Pre-existing coatings:

Remove old layers by sandblasting or mechanical grinding with P240-320 sandpaper, clean and degrease.

Products

EPX-040

Specifications

2K Epoxy ZNP (Light-grey or beige)

DFT:

40-150 µ

ACR-030

Specifications

2K Acrylic Filler (Light-grey or beige)

DFT:

50-150 µ

ACR-289

Specifications

2K Acrylic Topcoat HP (High-glossy)

DFT:

30-60 µ

Technical Documentation

Access to PDF

30-b

Body

Characteristics

Gloss:

High-gloss

Layers:

Surface preparation

Steel:

Blast clean to Sa 2½ or hand clean to St 3.

Galvanized Steel:

Use Scotch-Brite® abrasive cloth and degrease.

Aluminium:

Sand with P280-320 sandpaper, clean and degrease.

Plastic Materials:

Glass:

Pre-existing coatings:

Remove old layers by sandblasting or mechanical grinding with P240-320 sandpaper, clean and degrease.

Products

EPX-040

Specifications

2K Epoxy ZNP (Light-grey or beige)

DFT:

40-150 µ

ACR-030

Specifications

2K Acrylic Filler (Light-grey or beige)

DFT:

50-150 µ

ACR-289

Specifications

2K Acrylic Topcoat HP (High-glossy)

DFT:

30-60 µ

Technical Documentation

Access to PDF

31-a

For surfaces requiring resistance to extremely strong atmospheric influences

Great adhesion, high body and filling property. Great anticorrosive barrier. Excellent resistance to sunlight. Excellent appearance. Recommended DFT of primer = 40-50 µ, DFT of filler = 120-150 µ, sanding with P320-400 paper. Total DFT = 140-220 µ.

Characteristics

Gloss:

High-gloss

Layers:

Surface preparation

Steel:

Blast clean to Sa 2½ or hand clean to St 3.

Galvanized Steel:

Use Scotch-Brite® abrasive cloth and degrease.

Aluminium:

Sand with P280-320 sandpaper, clean and degrease.

Plastic Materials:

Glass:

Pre-existing coatings:

Remove old layers by sandblasting or mechanical grinding with P240-320 sandpaper, clean and degrease.

Products

EPX-040

Specifications

2K Epoxy ZNP (Light-grey or beige)

DFT:

40-150 µ

ACR-030

Specifications

2K Acrylic Filler (Light-grey or beige)

DFT:

50-150 µ

ACR-220

Specifications

1K Acrylic Basecoat

DFT:

20-30 µ

ACR-309

Specifications

2K Acrylic Clearcoat high-gloss

DFT:

30-60 µ

Technical Documentation

Access to PDF

31-b

Body

Characteristics

Gloss:

High-gloss

Layers:

Surface preparation

Steel:

Blast clean to Sa 2½ or hand clean to St 3.

Galvanized Steel:

Use Scotch-Brite® abrasive cloth and degrease.

Aluminium:

Sand with P280-320 sandpaper, clean and degrease.

Plastic Materials:

Glass:

Pre-existing coatings:

Remove old layers by sandblasting or mechanical grinding with P240-320 sandpaper, clean and degrease.

Products

EPX-040

Specifications

2K Epoxy ZNP (Light-grey or beige)

DFT:

40-150 µ

ACR-030

Specifications

2K Acrylic Filler (Light-grey or beige)

DFT:

50-150 µ

ACR-220

Specifications

1K Acrylic Basecoat

DFT:

20-30 µ

ACR-309

Specifications

2K Acrylic Clearcoat high-gloss

DFT:

30-60 µ

Technical Documentation

Access to PDF